Good, because we're bone dry.
Friday, June 22, 2012
Watching the satellite
There should be a rainstorm or thunderstorm in an hour or so. That little red blob to our west.
Good, because we're bone dry.
Good, because we're bone dry.
Wednesday, June 20, 2012
A hot day
It's a hot day, 86 F at the airport in Bangor, perhaps a little cooler here up in the Jackson hills. I've been working outside, but I came in seeking a cooler place. A good time to post an update on the blog.
Here's the south side of the house, with the herb garden and the wall where Aimee has been shingling. This is her own private project. I'm not allowed to do any of this work except to set the scaffold, staple the construction paper, and paint the trim.
I had been told by her Aimeeness a few days ago that I'd have to shift the scaffold and brace it a little better. Apparently it had been a little wobbly of late.
I waited for a day with a little cloud because in the very direct sun that we've been having, this spot would be a heat trap. This morning dawned a little foggy, and so before that burned off, I'd have a window of opportunity. I put up the last of the construction paper on the left and this was enough to tell me, yes, the scaffold was a bit wobbly. So it was off to the lumber yard for some two by four material to use as braces and as a safety rail.
That chore was followed by lunch -- with a ham sandwich of our own ham, as well as snap peas and radishes from our garden, and a half glass of rhubarb wine. Then I puttered in the vegetable garden, pulling weeds, watering, and fitting tomato cages. The garden is looking fairly good if I do say so myself. We should have some new potatoes in a week or two.
The rhubarb wine is another recent project. We have a good crop of rhubarb which we use for British style desserts like rhubarb crumble, but I though we might also have some wine out of it.
This is the finished product below. It's a little cloudy with pectin, but tastes just fine.
At least, I think so. But I'm in that self-satisfied mode I get into whenever the first harvests begin to come in, so I'm biased.
Sunday, June 10, 2012
The mother of all grills
I was happy to pick up a used oil tank the other day. I'd been wanting one for a while, to build a grill and smoker for lamb and fish.
These are very common metal tanks for home heating oil, and most Maine homes have one or two. We have one in our basement. The metal is one eighth inch mild steel, which has numerous uses here and there around a farm and can even be sold for scrap, so they're worth salvaging just for the steel. You can cut it with a circular saw, if you have the right kind of blade.
This particular one had about five gallons of black oil sludge left in it, a potential environmental hazard that would need to be dealt with first. You could see why it had been replaced. Although the metal was sound, the sludge had blocked up the outlet, so it would not have been serviceable.
Disconnecting an unblocking the outlet, I collected the oil in an old paint bucket to take to the recyclers, and then sprayed a few gallons of water over the inside to dampen down any sparks. Heat oil is not particularly volatile, as petroleum products go, and twenty gallons of water was enough of a dampener to be able to cut the thing up safely. It did take about ten blades for the circular saw, each one being good for about four feet of cutting.
I took off the rounded ends and hinged them together on a stand to make a very solid grill/smoker combination. The next job will be to fire it, to burn off the oily smell. Then I will need some actual grills, from an old oven or similar. Then watch out! Grill city, here we come. I have a stash of apple wood logs saved up just for the purpose. For smoking, we'll start a small fire in one corner and keep the lid closed and the draft shut down.
In other farm business, we've been waging war on the thistles. Aimee has decided, in her wisdom, that a donkey, or even two, may be needed around here. Apparently donkeys like thistles. Who knew?
A pair of donkeys have therefore been found and booked in for a few weeks of thistle eradication duty. Be sure to tune in for future news about these additional farm beasts later in the year. I'm sure they will be very newsworthy.
Especially if they actually eat the thistles. I have my doubts.
In the meantime, I've been mowing thistles. To begin, with our old Bolens riding mower's cutting deck out of action, I used a push mower, but that got old fast. I then went out and bought the bush hog in the last post, but although that equipment does a number on thistles, as well as the sumac and other noxious weeds we have, it isn't maneuverable enough to get all the thistles I need to get cost effectively. Some smaller unit was needed, something in between the push mower and the bush hog.
I decided to rebuild the Bolens deck. I figured this would be a good investment, and it was. These old Bolens mowers are very sturdy, a serious bit of equipment not at all like the plastic s**te you find in Home Despot.
I had to somehow track down a new spindle shaft, blades, and pulley for an old Bolens 18300 deck. I don't know when these machines were made but I'd say the late eighties or early nineties. Bolens was long ago bought out by MTD, and the new parts would have been several hundred dollars. As it was, the hunt for secondhand parts took several hours of Internet, about a hundred miles of driving, and $130 dollars, all for a box of nasty, greasy, mower deck pieces.
But beauty is in the eye of the beholder.
Here's the rebuilt mower with deck fitted. A solid beast if ever there was one. And it cuts well again, almost as good as new. I think $130 is a lot better than the couple thousand we might have spent on a new mower, which would probably only have lasted a few years.
Monday, June 4, 2012
Piglets and tillers
Our piglets arrived last Thursday, a day earlier than expected, but nearly three weeks later than in previous seasons. We'll have to see how well we do at getting them up to butchering weight by Thanksgiving.
This year we bought Berkshires, from a young Amish farmer in Unity. They seem fairly happy to be here. At their first home they were facing some pretty stiff competition for food, so this is the easy life. Plus they get treats, like Aimee's watermelon rinds and so on.
We also went out Saturday and purchased a bush hog. Not a different kind of pig, this is a piece of farm equipment for clearing brush. We were able to get a good condition four-foot Land Pride bush hog for $400, a bargain, and, what is more amazing our tiny 12.5 horse 1973 Kubota B6000 tractor can actually run it. I had some doubts, having spent a day earlier in the week trying to run, as an experiment, a much heavier unit that I'd borrowed from a local farm organization. The older heavier model couldn't actually be lifted with the tractor's hydraulic three point hitch, but the new one could. If it hadn't worked, I'd have had to sell the new one right away and go back to the drawing board, but all was well.
There were some difficulties on the equipment front, though. On Saturday our tiller shed its pulleys. Not the one I'd been expecting to fall off, but the engine pulley. The bolt had sheared off in the drive shaft end, and would have to be drilled out.
This created an occasion for me to use my engine-basher skills from the RAF. I removed the motor form the chassis and, it not being such a big unit, was able to fit it directly onto my drill press and make a nice precise 7/64ths hole in the sheared bolt. A quick twist with an #2 Easy-Out, and all was ready to reassemble. Very satisfying.
Maybe I should give up the teaching lark and start a machine shop.
Sunday, May 27, 2012
Re-enacting the African Queen?

In case you hadn't heard, Aimee and I are both on reduced workload for the summer. We work on 9-month contract and so can take our summers off unless we are silly enough to sign up for extra work.
We were, of course, silly enough.
We each accepted both administrative and research responsibilities, in varying degree. I have paid research and unpaid administrative responsibilities, while Aimee has paid administrative responsibilities and unpaid research. But both of our research programs require fieldwork, so we are at least outside for that work, even if it is "extra."
But our workloads are less this summer than in other recent years; in fact we both have the lowest level of such responsibilities that we've had for at least four years. I have only one research day a week and perhaps one or two additional meetings, while Aimee will rotate out of her administrative role on June 30th, a day she will celebrate quite fervently, since she's had enough of this responsibility for a while.
So a few vacation-style trips are perhaps in order. After all, we do live in "Vacationland".
The Womerlippis don't really "do" vactions (or "holidays" for you British readers). Farm animals don't take kindly to being left alone for any great length of time. And although at any given time we can find lots of applicants from among our students, farm-sitters are expensive, and usually don't work out that well. It's just not reasonable to expect that a short-term replacement can step into the very complicated operations that run the farm, and also deal with emergencies such as those described in the previous post.
We do take separate trips sometimes, leaving the other to look after the farm. Aimee likes to learn new things in biology, so she takes trips to study up on something, or to go to conferences and the like. I enjoy historical and human ecological field trips, especially to Britain, and regular readers will find reports from several such trips on this blog. Most recently, I've had to visit family, particularly my sick parents, both of which are gone now, and although I've often been able to do some sightseeing while visiting my family, the need to take frequent and repeated trips each year has been a big strain on the family budget, so further British and indeed any expensive excursions at all are "out" until the damage is repaired.
This combination of circumstances pretty much leaves day trips around Maine as our primary vacation option for this year. Which is, actually, just fine. Why not? We are lucky enough to live in a place that other folk spend a lot of money to come see.
And so we have a few such trips planned for the summer. And I will of course detail them faithfully on these blog pages for readers to enjoy.
Here's a report from our first and rather successful such excursion. I had been thinking of a paddling trip for a while, but wanted a nice easy flat paddle to get us in the swing of such things. It helped that I had to clean out the barn attic -- where the canoes have been stored, shamefully disused, for many years -- in order to admit a new and larger supply of hay, since we now own a ram who must be kept safe in a pen all summer, and must therefore eat hay
The boats were duly lowered down and the hay dust and squirrel droppings removed with the hose. I rigged up a rack for the truck and searched up the cooler, paddles, life-vests and, of course, the fishing poles and tackle box.
But where to go?
We live in a state that seems at least one third water. Good paddling opportunities abound, and indeed if we really wanted to paddle a more or less totally unexplored river, we could just hand-carry one of our boats down to the bridge over Great Farm Brook, not two hundred yards from our dooryard, and force our way through the alders into the mile-long flowage behind the beaver dams. With luck, and a fair bit of dragging, we could get all the way to Jackson village two miles downstream. I doubt anyone has attempted this paddle in years, and there are trout in our local brook, to boot,
But I didn't think Aimee was up for quite such a determined adventure right off the bat, so I perused the map and the internet for a while and finally settled on Lazy Tom Stream, up by Kokadjo, Maine, up beyond Greenville on Moosehead Lake.
This area has been the scene for several search and rescue call-outs, so I'm no stranger to Kokadjo and Greenville and environs, but I'd never actually driven up there just for fun. Lazy Tom Stream was cited as a good place to see moose, a small flowage like this would be safe from the stiff breeze forecast for the day (while the bigger lakes would be too choppy for a small canoe), and I could guess there would be trout.
The drive was about two-and-a-half hours. The official put-in is a rough turnaround and campsite just after the bridge (at latitude 49.69 north, longitude 69.43 west), but we missed this amenity to begin and instead carried our boat through alders to a spot just above the bridge.
The water was lower than I had expected, and we bumped over some rocks and had to drag our boat for a bit here and there, hence the title of the post. Not wishing to play the more stereotypically female, Hepburn role, Aimee insisted on taking her turn with the dragging. There were the usual jokes about Humphrey Bogart and leeches, but none attached (although one was found later on the hull).
We were able to reach the "source" of the flowage, a riffle (49.70 N, 69.44 W) beyond which progress would have meant leaving the boat, or dragging it empty. There is deeper water upstream of this riffle, at least according to the satellite picture on Google Earth, but we left it for another day. Instead I tried for a trout, while Aimee studied the local flora and fauna, taking pictures of a freshwater mussel and caddis fly "houses".

There were a few small fish to be caught in the pool below the riffle, but we couldn't stay long enough for that. The dogs had been imprisoned for the day on the porch, which would get too hot in the late afternoon. We ate our picnic lunch while drifting quickly back on the breeze. It was fun to just lean back and steer the boat and let the wind do all the work.
On the paddle back to the put-in we got to see a moose, a yearling cow, who stayed close by the stream for quite a while.
All's well that ends well, and we were pleased with our day out, especially the moose. More to come later in the summer.
Of course, my lovely wife is probably insensible of the rather large amount of husbandly forethought and planning that went into such a pleasant family adventure.
And since she says she doesn't read the blog, we'll just keep it that way.
Thursday, May 24, 2012
Making sure your animals are all in the right places
That seems to be the key to farming: Making sure all critters stay where they're meant to be.
This has been something of a challenge lately, as it often is in the spring of the year. Here, to prove it, is a fine photo of a human Womerlippi animal, trapped in a device meant for small chickens.
But that was the least of our problems, and easily rectified.
Once the photo was taken, that is.
The greatest problem was the ram. I'd been out early to feed, and all was well, so I went about my business, checking email and drinking coffee, prior to a planned-weeks-in-advance trip to a wind assessment site. At some point I got up to get more, and happened to look out of the back kitchen window at the ram pen, which is well-positioned so we can keep an eye on Bentley, the most dangerous of our critters..
No ram.
Not good. The gate seemed awry, to boot.
I headed out pretty fast, all thoughts of a second cup abandoned. And there was Bentley, in among the ewes and lambs, in the North Paddock, where he wasn't supposed to be.
Our ram Bentley weighs perhaps two hundred pounds and is pretty solid muscle, as well as extremely knuckle-headed. He can pretty much walk right over any normal stock fence. As a consequence we keep him in what is most easily described as a small fortress built from quarter-inch welded wire "cattle panels" five feet high, held up by very solid cedar fence posts, with two extra rings of barbed wire. In this case, the only time so far he's gotten out, he'd hammered at the weakest link, the hinges and gate-post, splintering the side of the gate where the hinges located.
The research trip was instantly postponed. Bentley was fine for now, with grass to eat and ewes to swoon over him, he'd stay in the North Paddock for the time being. But although he was obviously enjoying the new-found freedom, and the grass when normally he would eat hay, he couldn't be permitted to stay there for any length of time. As soon as he was bored, he'd walk right over the flimsy field fence and go walkabout.
I salvaged the broken gate and took it round to the door of the workshop. A quick study of my lumber stocks revealed a very solid ash-wood board, well seasoned. Thinking, "I'd like to see him try to splinter that!", I quickly built the board into the gate on the side where the hinges sat. I also reinforced the rails with plywood gussets, and generally beefed the whole thing up thoroughly.
Rehanging it was a tad tricky, given the extra twenty or so pounds of weight I'd built into it, but eventually we were able to get the gate swinging properly in place. A couple minutes extra work with hurdles to make a separating "chute," and a bucket of grain later, and we had the ram back where he should be, albeit decidedly ticked off to have his grazing and carousing curtailed.
That wasn't the end of our misplaced animal woes. We had a heck of a time getting our older ewe Jewel into the trailer for the trip to the butchers. Jewel, if readers remember, received the death sentence a few weeks ago for the crime of bullying young sheep mother Molly, but the sentence was delayed while the butchers rebuilt after a fire. All was ready, and I even managed to lure her into the barn with some grain, but some sheeply sixth sense intervened, and she easily detected me coming around the back to close the back door on her and escaped my clutches. It took a good forty minutes of assiduous work for wife and husband with temporary fence and even a dog to get her caught again. This was annoying, for sure, but I couldn't very well blame her for putting up a good fight.
It was only the very next day when two sheep wriggled through the fence to the herb garden. And the day after that, while Aimee was training her chicks to grass, one particularly athletic young hen climbed all the way to the top of her makeshift cage.
Finally, we had two male lambs that were to be sold on for summer fattening, and that needed to be loaded for the short drive to their new home. This time things went better. I was able to catch one in the barn, and the other was caught outside with some grain.The trucking went easily, and I came back with the payment, the first farm income this year.
(There would have been some egg money, but some low-life stole it from the egg-cooler we put at the bottom of our road.)
I'd say at this point that all animals are where they're meant to be. I'm not sure for how long this situation will remain, but I am grateful for small mercies.
This has been something of a challenge lately, as it often is in the spring of the year. Here, to prove it, is a fine photo of a human Womerlippi animal, trapped in a device meant for small chickens.
But that was the least of our problems, and easily rectified.
Once the photo was taken, that is.
The greatest problem was the ram. I'd been out early to feed, and all was well, so I went about my business, checking email and drinking coffee, prior to a planned-weeks-in-advance trip to a wind assessment site. At some point I got up to get more, and happened to look out of the back kitchen window at the ram pen, which is well-positioned so we can keep an eye on Bentley, the most dangerous of our critters..
No ram.
Not good. The gate seemed awry, to boot.
I headed out pretty fast, all thoughts of a second cup abandoned. And there was Bentley, in among the ewes and lambs, in the North Paddock, where he wasn't supposed to be.
Our ram Bentley weighs perhaps two hundred pounds and is pretty solid muscle, as well as extremely knuckle-headed. He can pretty much walk right over any normal stock fence. As a consequence we keep him in what is most easily described as a small fortress built from quarter-inch welded wire "cattle panels" five feet high, held up by very solid cedar fence posts, with two extra rings of barbed wire. In this case, the only time so far he's gotten out, he'd hammered at the weakest link, the hinges and gate-post, splintering the side of the gate where the hinges located.
The research trip was instantly postponed. Bentley was fine for now, with grass to eat and ewes to swoon over him, he'd stay in the North Paddock for the time being. But although he was obviously enjoying the new-found freedom, and the grass when normally he would eat hay, he couldn't be permitted to stay there for any length of time. As soon as he was bored, he'd walk right over the flimsy field fence and go walkabout.
I salvaged the broken gate and took it round to the door of the workshop. A quick study of my lumber stocks revealed a very solid ash-wood board, well seasoned. Thinking, "I'd like to see him try to splinter that!", I quickly built the board into the gate on the side where the hinges sat. I also reinforced the rails with plywood gussets, and generally beefed the whole thing up thoroughly.
Rehanging it was a tad tricky, given the extra twenty or so pounds of weight I'd built into it, but eventually we were able to get the gate swinging properly in place. A couple minutes extra work with hurdles to make a separating "chute," and a bucket of grain later, and we had the ram back where he should be, albeit decidedly ticked off to have his grazing and carousing curtailed.
That wasn't the end of our misplaced animal woes. We had a heck of a time getting our older ewe Jewel into the trailer for the trip to the butchers. Jewel, if readers remember, received the death sentence a few weeks ago for the crime of bullying young sheep mother Molly, but the sentence was delayed while the butchers rebuilt after a fire. All was ready, and I even managed to lure her into the barn with some grain, but some sheeply sixth sense intervened, and she easily detected me coming around the back to close the back door on her and escaped my clutches. It took a good forty minutes of assiduous work for wife and husband with temporary fence and even a dog to get her caught again. This was annoying, for sure, but I couldn't very well blame her for putting up a good fight.
It was only the very next day when two sheep wriggled through the fence to the herb garden. And the day after that, while Aimee was training her chicks to grass, one particularly athletic young hen climbed all the way to the top of her makeshift cage.
Finally, we had two male lambs that were to be sold on for summer fattening, and that needed to be loaded for the short drive to their new home. This time things went better. I was able to catch one in the barn, and the other was caught outside with some grain.The trucking went easily, and I came back with the payment, the first farm income this year.
(There would have been some egg money, but some low-life stole it from the egg-cooler we put at the bottom of our road.)
I'd say at this point that all animals are where they're meant to be. I'm not sure for how long this situation will remain, but I am grateful for small mercies.
Thursday, May 17, 2012
Shearing day
Probably
the biggest day in our farm calendar is the day we get the sheep
sheared. There are only eleven adult sheep right now, so this shouldn't seem
like such a huge event, but it is.
The main difficulty always seems to be lining up a sheep shearer. We had first called our regular shearer about three weeks ago, leaving a message on what we thought was his answer machine, only to have him call us back almost a week later, leaving a message for us to email him.
So we dutifully emailed him, once, twice, three times. When that didn't help, we called the first number again, only to have his spouse call us back, leaving a message saying that they had separated and were not "talking much any more," but that she would call him for us.
Finally he called us one evening saying that he was on vacation in the Virgin Islands and wouldn't be back until the end of this week. I took down his new number and said we'd call him at the end of the week, but started to make back-up plans.
We've known for a long time that one day there may not be any sheep shearers available in this part of Maine. It's always been in my mind that if we want to keep these sheep, I'll need to learn to shear. When sheep shearers take vacations in the Caribbean during shearing season, it suddenly seemed like that time might already be on us.
(What's the world coming to?)
So once again I began watching You-Tube videos about grinding blades and the best shearing positions, and I even experimented with our old Stewart Shearmaster machine on one ewe that had lost some fleece and needed a tidy-up.
Suffice it to say that Aimee was not impressed with the results.
But the very next evening a different shearer who had kept our number from a similar go-around last year called us to see if we had any new business for her, and we jumped at the chance to get the sheep sheared properly as soon as we could. Virgin Islands be blowed! Fly strike season was already on us. We needed to get those fleeces off those sheep right smartish.
So we made the earliest date with the new shearer, called "Edie, short for Edith," that we could, and I made my usual preparations in the barn.
We were impressed with Edie. Here she is at work with our big ram, Bentley:
Finally, here's a shot Aimee took from inside the barn looking out. Edie used a serious sheep shearing machine made in Australia, which also impressed us.
All in all, things went very well, and we were very relieved to have successfully gotten the sheep sheared for another year.
The main difficulty always seems to be lining up a sheep shearer. We had first called our regular shearer about three weeks ago, leaving a message on what we thought was his answer machine, only to have him call us back almost a week later, leaving a message for us to email him.
So we dutifully emailed him, once, twice, three times. When that didn't help, we called the first number again, only to have his spouse call us back, leaving a message saying that they had separated and were not "talking much any more," but that she would call him for us.
Finally he called us one evening saying that he was on vacation in the Virgin Islands and wouldn't be back until the end of this week. I took down his new number and said we'd call him at the end of the week, but started to make back-up plans.
We've known for a long time that one day there may not be any sheep shearers available in this part of Maine. It's always been in my mind that if we want to keep these sheep, I'll need to learn to shear. When sheep shearers take vacations in the Caribbean during shearing season, it suddenly seemed like that time might already be on us.
(What's the world coming to?)
So once again I began watching You-Tube videos about grinding blades and the best shearing positions, and I even experimented with our old Stewart Shearmaster machine on one ewe that had lost some fleece and needed a tidy-up.
Suffice it to say that Aimee was not impressed with the results.
But the very next evening a different shearer who had kept our number from a similar go-around last year called us to see if we had any new business for her, and we jumped at the chance to get the sheep sheared properly as soon as we could. Virgin Islands be blowed! Fly strike season was already on us. We needed to get those fleeces off those sheep right smartish.
So we made the earliest date with the new shearer, called "Edie, short for Edith," that we could, and I made my usual preparations in the barn.
We were impressed with Edie. Here she is at work with our big ram, Bentley:
And here's the finished effect with Quetzal. The poodle bob on her tail is the result of the protein deficiency mentioned in the last post, and will either fall off or blend in with the new fleece when it grows out.
Finally, here's a shot Aimee took from inside the barn looking out. Edie used a serious sheep shearing machine made in Australia, which also impressed us.
All in all, things went very well, and we were very relieved to have successfully gotten the sheep sheared for another year.
Subscribe to:
Posts (Atom)









